Hot Dip Galvanized Helical Earth Anchor Rod with Welded Eye Screw Ground Anchor for Guy Wire Pole Line Support
High torque retention, ISO 1461 hot-dip galvanized coating for hypersaline soil dissipation.
Get a Quote
Procured by EPC contractors, civil utilities, and high-voltage transmission facilities across Abu Dhabi, Dubai, Sharjah, and global petrochemical zones.
Overcoming the twin challenges of high soil electrical resistivity and aggressive Sabkha-driven electrolytic corrosion across the Arabian Peninsula.
Grounding bus bars installed across Dubai Electricity & Water Authority (DEWA) and Abu Dhabi Distribution Company (ADDC) substations require 99.9% pure C11000 electrolytic tough pitch (ETP) or oxygen-free copper. With conductivity exceeding 100% IACS, our bars minimize thermal runaways during high kA fault clearing cycles.
Coastal developments across Jebel Ali, Khalifa Port, and Al Ruwais feature hyper-saline "Sabkha" terrain where ground moisture contains extreme chloride concentrations. Our manufacturing includes specialized tin electro-plating (≥15 μm) and heavy nickel coatings preventing galvanic degradation between copper conductors and galvanized structural anchors.
In environments where summer ambient temperatures hit 52°C with switchgear enclosure temperatures exceeding 70°C, thermal de-rating is critical. We manufacture custom cross-sections (up to 100mm × 10mm dual-run) coupled with high-temperature glass-reinforced polyamide or halogen-free polyester standoff insulators rated to 1000V AC / 1500V DC.
| Parameter / Dimension | Standard Configuration | UAE Utility Grade (DEWA / ADDC) | Heavy Industrial & Oil/Gas (ADNOC) |
|---|---|---|---|
| Base Alloy Grade | CW004A / C11000 ETP Copper | C11000 ETP (≥99.90% Cu) | C10100 / C10200 Oxygen-Free Electronic |
| Surface Protective Plating | Bare Bright Mill / Light Tinning | Electro-tin plated 8–12 μm (BS EN 12449) | Dual Tin-Lead or Hot-Dip Tinned ≥20 μm |
| Standard Hole Arrays | M10 / M12 In-line on 25mm Pitch | Pre-tapped or Cleared Dual-Hole M10/M12 | Custom CAD CNC Punching to Drawing |
| Short-Circuit Capacity (1s) | Up to 25 kA RMS | 40 kA to 50 kA RMS Fault Clearing | Up to 63 kA RMS with Reinforced Standoffs |
| Isolator Hardware | Standard Epoxy Resin 600V | Polyester Halogen-Free UL94 V-0 Standoffs | High-Creepage Distance Track-Resistant Standoffs |
Strategic convergence of renewable mega-grids, high-density AI data centers, and industrial electrification across the GCC corridor.
Massive photovoltaic deployments require extensive localized equipotential bonding systems. Modern EPC specifications demand pre-punched, corrosion-resistant grounding bars engineered to withstand high wind-load vibrations and cyclic thermal expansion without terminal loosening or micro-arcing.
Dubai and Abu Dhabi lead the Middle East in tier-III and tier-IV colocation centers. Sensitive server topologies dictate zero-voltage reference grounding. Our OEM low-impedance copper busbars and copper-bonded networks provide instantaneous dissipation for high-frequency common-mode electrical noise.
With tightening regulations under the UAE Ministry of Industry and Advanced Technology (MoIAT), infrastructure projects mandate full raw material traceability (EN 10204 3.1 certification), fire-retardant structural mounts, and compliance with IEC 62561-1 standards for connection components.
Combining automated PLC-driven forging, high-tonnage stamping, and precision chemical finishing for guaranteed performance on overseas sites.
Our heavy industrial plant utilizes PLC-controlled electroforging and presses capable of generating over 100 tonnes of pressure, ensuring exact material density, flat cross-sections, and warp-free fabrication across long-span bar geometries.
Complete control over finishing: ISO 1461 hot-dip galvanizing for steel foundations, and precision acid-washing, passivation, and electro-tin plating for copper components, guaranteeing salt-spray endurance beyond 1,000 continuous hours.
Every project possesses unique architectural constraints. Our engineering group interprets complex electrical layout drawings to produce custom drilled, tapped, radius-bent, or modular multi-disconnect grounding bus bars ready for rapid job-site bolting.
Panels and busbars are individually wrapped with anti-corrosion VCI films, moisture desiccant barriers, and packed in reinforced fumigated wooden crates explicitly designed for containerized shipping to Jebel Ali, Mina Zayed, and Sharjah ports.
Addressing compliance, customs, documentation, and technical customization for local engineering consultants.
Yes. Our grounding bars comply with DEWA and ADDC distribution parameters. We utilize C11000 ETP copper exceeding 99.9% electrical purity, fitted with certified tin electro-plating, pre-tested halogen-free polyester insulators, and high-tensile stainless steel (AISI 316) fastener sets matching local substation guidelines.
Absolutely. We manufacture Single Disconnecting Link and Double Disconnecting Link earth bars. These allow testing technicians to isolate the local grounding array from incoming main equipotential loops without interrupting the plant's live protective systems.
Every shipment is accompanied by a full Quality Dossier: Mill Test Certificates (EN 10204 Type 3.1), third-party mechanical hardness and conductivity test results, plating thickness measurement logs, and Certificate of Origin (COO) verified for UAE customs entry.
Standard fabrication runs require 10 to 18 business days depending on punching complexity and bar quantity. Direct sea freight to Jebel Ali Port or Khalifa Port typically ranges between 14 to 22 days, with urgent air-cargo consignments dispatched via Dubai World Central (DWC).
Submit your electrical drawings, single-line schematics, or material take-offs. Our technical sales engineers provide verified quotes within 24 hours.