What is the difference between electroforged and manually welded gratings?

Electroforged gratings are produced on PLC-controlled machines that apply more than 100 tonnes of hydraulic pressure and approximately 2200 A of current to fuse every cross bar into the bearing bar, creating a seamless joint with no open welds. Manually welded gratings are fabricated panel by panel and are preferred for non-standard shapes, heavy bar sections and complex cut-outs.

Which stainless steel grade should I choose for coastal or chemical environments?

AISI 304 suits most food, pharmaceutical and indoor process areas. AISI 316 contains molybdenum and is recommended for marine, coastal and chloride-rich chemical environments. AISI 309 is used where higher temperature resistance is needed. Gratings are acid washed and electro-polished after welding.

Can gratings be fabricated with cut-outs, toe plates and banding?

Yes. Round, square and edge cut-outs can be incorporated in pressure-welded and electroforged panels, and every cut-out is banded with flat bar. Custom panels are typically produced in widths from 250 mm up to 1200 mm with lengths as required by the project drawing.

What information is needed to evaluate a grating requirement?

Share the bearing bar size, bar pitch, cross bar pitch, panel dimensions, material grade, surface finish, design load or span, quantity, required standards and destination port. Layout drawings speed up engineering review.

Is FRP grating a suitable replacement for steel grating?

FRP and fiberglass gratings weigh much less than steel, do not corrode and are non-conductive, which makes them suitable for chemical plants, water treatment, offshore and electrical areas. Load capacity depends on panel depth and span, so the section should be selected against the design load.

Aluminum Anti Skid Floor Mesh Iron Plate Traction Tread Ladder Rung Gratings Crocodile Mouth Non Slip Stair Tread

1 / 5

Aluminum Anti Skid Floor Mesh Iron Plate Traction Tread Ladder Rung Gratings Crocodile Mouth Non Slip Stair Tread

Send Inquiry

Product Description

☰ Product Specification

Stainless Steel Antiskid Plate Specification Sheet

Safety Grating and Anti-slip Plate Models

Types	Grip Strut, Diamond Channels, Perf-O-Grip, Traction Tread, Plank, Walkway, Stairs
Commodity	Stainless steel antiskid plate
Grade	201, 304, 310s, 309s, 321, 316l, 316, 430, 301, 302, 305
Standard	ASTM, AISI, GB, JIS, KS, EN
Thickness	0.3 mm to 100 mm
Width	1000 mm, 1219 mm, 1250 mm, 1500 mm, 1800 mm, 2000 mm or as request
Length	2000 mm - 6000 mm or as required
Application	Stainless steel plate applies to construction field, ships building industry, petroleum & chemical industries, war and electricity industries, food processing and medical industry, boiler heat exchanger, machinery and hardware fields

⚙ Product Process

🛠 Application

Architectural and Structural Decking Application

📦 Product Packaging

★ Our Advantages

Factory Direct Advantages and Quality Assurance

📜 Certifications

❓ Frequently Asked Questions (FAQ)

Q1 What types of stainless steel antiskid plates are available?

We provide various types including Grip Strut, Diamond Channels, Perf-O-Grip, Traction Tread, Plank, Walkway, and Stair treads to suit diverse slip-resistant flooring needs.

Q2 Which stainless steel grades are supplied?

We offer an extensive selection of stainless steel grades including 201, 304, 310s, 309s, 321, 316l, 316, 430, 301, 302, and 305 to meet varying anti-corrosion and strength requirements.

Q3 What are the standard dimensions and thickness options?

Plate thickness ranges from 0.3 mm up to 100 mm. Standard widths include 1000 mm, 1219 mm, 1250 mm, 1500 mm, 1800 mm, and 2000 mm, with standard lengths from 2000 mm to 6000 mm. Custom cut sizes are also available upon request.

Q4 What manufacturing standards are adhered to?

Our products are strictly manufactured according to international standards such as ASTM, AISI, GB, JIS, KS, and EN, ensuring superior quality and durability.

Q5 What are the typical industrial applications for these plates?

Stainless steel antiskid plates are widely used in construction, shipbuilding, petroleum and chemical plants, military and power plants, food processing, medical industries, heat exchangers, and general machinery equipment.

Q6 How are the products packaged for shipment?

Products are secured using standard sea-worthy export packaging to ensure protection against moisture, damage, and rust during international transportation.

Aluminum Anti Skid Floor Mesh Iron Plate Traction Tread Ladder Rung Gratings Crocodile Mouth Non Slip Stair Tread

Product Description

Related Products

Customized Metal Bar Grating Stair Steps Hot Dip Galvanized Anti Slip Stair Treads

JS Industrial Grade Perforated Steel Cable Tray | Loading Capacity Tested for Large Scale Factory Floors

Platform Walkway Floor Fiberglass FRP Grating

Customizable Steel Structure Steel Sump Cover Grating for Construction Rainwater Floor Drain Grate Heavy Traffic Type

Serrated Steel Grating Stair Treads For Industrial Walkway And Safety Flooring

Custom 38*38*30 UV Curing Anti-Corrosion FRP/GRP Fiberglass Gratings For Floor &amp; Warehouse Durable Walkway

Cable Protection PVC Duct Channel Plastic Trunking Tray for Electrical Wire Protection and Cable Management

Outdoor Anti Slip Metal Steel Spiral Staircase Treads

Chemical Dosing Room FRP Grating Platform for Strong Corrosive Reagent Areas with Safe Anti Slip Surface

Factory Custom Size FRP Grating Fiberglass Grille Non-slip GRP Mesh Floor for Car Wash Bay Drainage and Industrial Platform

Custom 383830 UV Curing Anti-Corrosion FRP/GRP Fiberglass Gratings For Floor & Warehouse Durable Walkway