What is the difference between electroforged and manually welded gratings?

Electroforged gratings are produced on PLC-controlled machines that apply more than 100 tonnes of hydraulic pressure and approximately 2200 A of current to fuse every cross bar into the bearing bar, creating a seamless joint with no open welds. Manually welded gratings are fabricated panel by panel and are preferred for non-standard shapes, heavy bar sections and complex cut-outs.

Which stainless steel grade should I choose for coastal or chemical environments?

AISI 304 suits most food, pharmaceutical and indoor process areas. AISI 316 contains molybdenum and is recommended for marine, coastal and chloride-rich chemical environments. AISI 309 is used where higher temperature resistance is needed. Gratings are acid washed and electro-polished after welding.

Can gratings be fabricated with cut-outs, toe plates and banding?

Yes. Round, square and edge cut-outs can be incorporated in pressure-welded and electroforged panels, and every cut-out is banded with flat bar. Custom panels are typically produced in widths from 250 mm up to 1200 mm with lengths as required by the project drawing.

What information is needed to evaluate a grating requirement?

Share the bearing bar size, bar pitch, cross bar pitch, panel dimensions, material grade, surface finish, design load or span, quantity, required standards and destination port. Layout drawings speed up engineering review.

Is FRP grating a suitable replacement for steel grating?

FRP and fiberglass gratings weigh much less than steel, do not corrode and are non-conductive, which makes them suitable for chemical plants, water treatment, offshore and electrical areas. Load capacity depends on panel depth and span, so the section should be selected against the design load.

Custom Small Gap Anti Jam Stainless Steel Drainage Grate, Vehicle Load Bearing Drain Cover for Driveway and Garage Floor Drain

1 / 5

Custom Small Gap Anti Jam Stainless Steel Drainage Grate, Vehicle Load Bearing Drain Cover for Driveway and Garage Floor Drain

Send Inquiry

Custom Small Gap Anti Jam Stainless Steel Drainage Grate, Vehicle Load Bearing Drain Cover for Driveway and Garage Floor Drain

Related Products

Driveway Trench Drain Channel With Resin Stainless Steel Cast Iron Grate Cover Outdoor Resin Drainage Channel Sreel Grating

Corrosion Resistance Mini Mesh Fiberglass Molded Grating Grp Floor Panels

Factory Custom Size FRP Grating Fiberglass Grille Non-slip GRP Mesh Floor for Car Wash Bay Drainage and Industrial Platform

304 Stainless Steel Drain Trench Linear Metal Grating Cover

FRP/GRP Pultruded Grating Smooth Customized Size Any Color Construction Agricultural Greenhouse Use Moulding Punching Cutting

Q235 Galvanized Steel Grating Plain Bar Steel Mesh Flooring for Drainage System and Outdoor Use in Power Plant Projects

SU High Strength FRP GFRP Floor Grating Walkway-ISO9001 Certified Customized Size &amp; Shape Cutting Service Available

.125 Aluminum Traction Tread Safety Grating PLANKS

Stainless Steel Trench Grating 304 Linear Drain Grate For Outdoor Drainage

JS Industrial Grade Perforated Steel Cable Tray | Loading Capacity Tested for Large Scale Factory Floors

SU High Strength FRP GFRP Floor Grating Walkway-ISO9001 Certified Customized Size & Shape Cutting Service Available