What is the difference between electroforged and manually welded gratings?

Electroforged gratings are produced on PLC-controlled machines that apply more than 100 tonnes of hydraulic pressure and approximately 2200 A of current to fuse every cross bar into the bearing bar, creating a seamless joint with no open welds. Manually welded gratings are fabricated panel by panel and are preferred for non-standard shapes, heavy bar sections and complex cut-outs.

Which stainless steel grade should I choose for coastal or chemical environments?

AISI 304 suits most food, pharmaceutical and indoor process areas. AISI 316 contains molybdenum and is recommended for marine, coastal and chloride-rich chemical environments. AISI 309 is used where higher temperature resistance is needed. Gratings are acid washed and electro-polished after welding.

Can gratings be fabricated with cut-outs, toe plates and banding?

Yes. Round, square and edge cut-outs can be incorporated in pressure-welded and electroforged panels, and every cut-out is banded with flat bar. Custom panels are typically produced in widths from 250 mm up to 1200 mm with lengths as required by the project drawing.

What information is needed to evaluate a grating requirement?

Share the bearing bar size, bar pitch, cross bar pitch, panel dimensions, material grade, surface finish, design load or span, quantity, required standards and destination port. Layout drawings speed up engineering review.

Is FRP grating a suitable replacement for steel grating?

FRP and fiberglass gratings weigh much less than steel, do not corrode and are non-conductive, which makes them suitable for chemical plants, water treatment, offshore and electrical areas. Load capacity depends on panel depth and span, so the section should be selected against the design load.

Hot Dipped Galvanized Zinc Coating Steel Grating Floor Platform Walkway Anti-Corrosion for Office Building Projects

1 / 5

Hot Dipped Galvanized Zinc Coating Steel Grating Floor Platform Walkway Anti-Corrosion for Office Building Projects

Send Inquiry

Product Description

Product Name	Steel Grating / Grating Plate
Model	G Series / S Series / Custom
Bearing Bar Height (mm)	20 / 25 / 30 / 32 / 35 / 38 / 40 / 45 / 50 / 65 / 75 / 100
Bearing Bar Thickness (mm)	3 / 4 / 5 / 6
Bearing Bar Pitch (mm)	12.5 / 15 / 20 / 25 / 30 / 34 / 40
Cross Bar Pitch (mm)	38 / 50 / 76 / 100
Cross Bar Type	Twisted Square Bar / Round Bar / Flat Bar
Twisted Square Bar Size (mm)	4×4 / 5×5 / 6×6 / 8×8
Panel Size (L×W, mm)	Custom, Max 6000×2000
Material	Q235 Carbon Steel / Q345B / Stainless Steel 304 / Stainless Steel 316 / Galvanized Sheet
Surface Treatment	Hot Dip Galvanized / Cold Galvanized / Painted / Oiled / No Treatment
Hot Dip Galvanized Coating (μm)	50-80 / 80-100 / 100+

Frequently Asked Questions (FAQ)

Q1 What is steel grating?

Steel grating is a load-bearing platform made of bearing bars and cross bars, widely used for walkways, platforms, stair treads, and drainage covers.

Q2 What materials are available for steel grating?

Common materials include Q235 carbon steel, Q345B, stainless steel 304, stainless steel 316, and galvanized sheet.

Q3 What surface treatments do you offer?

We offer hot dip galvanizing, cold galvanizing, painting, oiling, or no treatment. Hot dip galvanizing is recommended for outdoor anti-corrosion.

Q4 How to choose the bearing bar height?

The higher the bearing bar, the higher the load capacity. For pedestrian walkways, 25-32mm is enough; for heavy industrial platforms, 40-75mm is recommended.

Q5 What is the difference between hot dip galvanizing and cold galvanizing?

Hot dip galvanizing provides thicker coating (50-100μm) and better corrosion resistance, suitable for outdoor use. Cold galvanizing is thinner and mainly for indoor or temporary applications.

Q6 Do you offer serrated (anti-slip) grating?

Yes, serrated steel grating is available. It provides better anti-slip performance, ideal for oily or wet environments.

Hot Dipped Galvanized Zinc Coating Steel Grating Floor Platform Walkway Anti-Corrosion for Office Building Projects

Product Description

Related Products

New Arrival 200mm Width Stainless Steel Wire Mesh Cable Tray for Data Center and Commercial Building Wiring

Hot Dipped Galvanized Zinc Coating Steel Grating Floor Platform Walkway Anti-Corrosion for Office Building Projects

Galvanised Cable Tray Perforated Metal Cable Tray for Electric Cable Organization Indoor

Solid PVC Cable Trunking Plastic Cable Tray For Effective Electricity Protection

High Strength Galvanized Steel Grating Panels Heavy Duty Industrial Platforms Walkways Drainage Bulk Distributor Supply

Cutosm 2styles Embossed Non-slip Non-woven Fabric Runner Carpet Treads Stair Mat

HUAPENG Slotted Cable Tray 304 Stainless Steel High-Rise Cable Tray Heat Dissipation Perforated Cable Tray

Antistatic ESD Safety Waterproof Vinyl Flooring Conductive Tiles Floor Mat Plain Anti-Slip 5-Year Warranty For Cleanroom Office

Hdmann Custom Cable Management Tray GRP FRP Fiberglass Cable Ladder Non-Conductive Anti-Corrosion for Marine Platform Project

Durable Galvanized Steel Anti-Corrosion Fire Water Resistant Grating Stair Treads for Outdoor Walkways Warehouses Office